Nintendo World Report Forums

Gaming Forums => Nintendo Gaming => Topic started by: mjbd on December 13, 2003, 07:01:22 AM

Title: Anyone Here Using Warppipe? Need Help!
Post by: mjbd on December 13, 2003, 07:01:22 AM
Here is what I have: Gamecube Broadband adapter, Netgear 4 port hub, NYKO internet extender (wireless to get my DSL signal to my PC in the basement), and a PC using Windows XP.  I have downloaded Warppipe, and have tried connecting with other users, but has not worked yet.  It usually brings up a no response.  Whats the deal?  If there is anyone who has the time sometime later today to get on and try and help me get going, I would really appreciate it.  
Title: RE: Anyone Here Using Warppipe? Need Help!
Post by: KDR_11k on December 13, 2003, 07:46:45 AM
Have you checked your firewall settings?
Title: RE:Anyone Here Using Warppipe? Need Help!
Post by: mjbd on December 13, 2003, 08:48:45 AM
Yes, I turned it off.  Are you a warppipe user KDR_11k?  If so, do you have a AOL IM?  
Title: RE:Anyone Here Using Warppipe? Need Help!
Post by: cielo on December 15, 2003, 08:06:22 AM
I'm not sure if I completely understand your setup.  Is your GC physically connected to your PC?  If you don't already know, WP does not support wireless connections; the GC and a PC must be physically connected.  Good luck...
Title: RE:Anyone Here Using Warppipe? Need Help!
Post by: AJL221893 on December 15, 2003, 10:58:32 AM
Sorry, excuse my double post.
Title: RE:Anyone Here Using Warppipe? Need Help!
Post by: AJL221893 on December 15, 2003, 10:59:35 AM
But before you go out and buy a wired one, just wait for the final version after the beta to come out. I heard that everythings a lot easier, and they might add support for wireless. Plus, theres other LAN to online things you can use, like X-link, and gamespy, whenever they're coming out.  
Title: RE:Anyone Here Using Warppipe? Need Help!
Post by: cielo on December 15, 2003, 11:20:12 AM
As an addendum to my previous post, wireless may work with a wireless bridge.  Or, as mentioned, you can wait for the version 1.0 to come out that will hopefully support wireless.  I bought an 802.11g router/pci card prior to its release.  But since I decided I wanted to play asap, I bought a used Linksys 802.11b router ($30) and inconspicuously ran cabling from the pc to gc.  Both the cable (100ft) and 802.11b router ended up costing less than the 802.11g pci card alone.  Good luck...

WP Thread re. Nyko Net Extender