Gaming Forums => Nintendo Gaming => Topic started by: sledgmb on April 01, 2003, 11:07:08 AM
Title: rogue leader in progressive scan....how?
Post by: sledgmb on April 01, 2003, 11:07:08 AM
hi all. got my cube last week and the component cables should be delivered this friday. i've read that to get metroid prime to run in progressive scan you hold down the "B" button as you power on the system. do you do this same trick to get rogue leader to display in progressive scan? is there a different trick for each game? anyone know how to do this?
thanks.
Title: rogue leader in progressive scan....how?
Post by: Berto2K on April 01, 2003, 11:08:47 AM
It is the same for all games, just hold down the B button. You won't see a picture at first, until it switches over.
Title: rogue leader in progressive scan....how?
Post by: sledgmb on April 01, 2003, 11:11:45 AM
do you get any confirmation onscreen that it is displaying in progressive scan, other than a better picture?
Title: rogue leader in progressive scan....how?
Post by: olimar on April 01, 2003, 01:43:26 PM
I don't have progressive scan but i have a question about that. do you have to hold B button everytime you play or just the first time you use the cable or game.
Title: rogue leader in progressive scan....how?
Post by: Berto2K on April 01, 2003, 07:44:33 PM
You must hold down the button every time you turn on the system. If you just quit a game and let the idle movies play, it will stay on in prog scan. But if you turn the system off, you'll have to press the button. Except one time, when I started up either Prime or WW, it asked which mode I wanted to start up in since I had both cables plugged in.
